Related Manuals for Ikan Flyweight Camcorder
Summary of Contents for Ikan Flyweight Camcorder
- Page 1 Flyweight Camcorder Flyweight QUICKSTART GUIDE 3903 Stoney Brook Dr. Houston TX 77063 1.713.272.8822 support@ikancorp.com www.ikancorp.com © 2012 ikan Corporation. All right reserved...
- Page 2 Flyweight Camcorder Flyweight QUICKSTART GUIDE What’s included Checked by 1 x Weightbag 1 x Double Cheeseplate 1 x Crossblocks 1 x Baseplate (ELE-WB) (ELE-DBLPT) (ELE-CB-19) (ELE-SBP) 1 x T-Plate 1 x DRS-01 2 x Grip Handles ...
- Page 3 Flyweight Camcorder Flyweight QUICKSTART GUIDE www.ikancorp.com 713-272-8822...
-
Page 4: Adjustment Points
Flyweight Camcorder Flyweight QUICKSTART GUIDE ADJUSTMENT POINTS Numerous Adjustment Points allow for precise positioning modifications to the Small Base Plate component of your Flyweight Camcorder Kit. fi Loosen Thumb Screws to move 18” Rods forward/backwards. ” Loosen front Hex Screws to make vertical/horizontal adjustments. - Page 5 Flyweight Camcorder Flyweight QUICKSTART GUIDE ATTACHING DOUBLE CHEESEPLATE To attach the Double Cheeseplate (ELE-DBLPT) onto the Shoulder Mount, lift up the strap and screw two Socket Head Screws through the indicated holes of the Double Cheeseplate and Shoulder Mount. Once in place, return the strap back to its original position.
-
Page 6: Attaching Beltclip
Flyweight Camcorder Flyweight QUICKSTART GUIDE ATTACHING BELTCLIP To attach the T-Plate onto the Double Cheeseplate (ELE-DBLPT), screw two Socket Head Screws through the T-Plate into the central holes of the Double Cheeseplate. www.ikancorp.com 713-272-8822... - Page 7 Flyweight QUICKSTART GUIDE SECURING WEIGHT BAG To secure the weight bag (ELE-WB) onto the Flyweight Camcorder, follow these simple steps. (1) First, slide the strap through the slots around the weight bag. (2) After the strap is secured, hook the strap onto the Double Cheeseplate (ELE-DBLPT) with the attached T-Plate.
-
Page 8: Bottom View
Flyweight Camcorder Flyweight QUICKSTART GUIDE BASE PLATE ATTACHMENT POINTS There are a total of four threaded attachment points for your base plate; five 3/8-16 and four 1/4-20 threaded holes for you to chose from. Simply tighten the screw from your base plate into the appropriate hole for easy mounting and unmounting from your tripod’s quick release. - Page 9 Flyweight Camcorder Flyweight QUICKSTART GUIDE MOUNTING YOUR CAMERA Loosen the thumb screw and slide out one of the 12” rods, in order to gain access to easily fit your hand underneath the top portion of the small base plate. Next, take the D-Ring and slide it through the opening. Allign the 1/4-20 threaded hole on the bottom of your camera with the D-Ring and tighten until your camera is secure.