Ikan PT2000 Quick Start Manual

Q
S
uick tart
I ntroductIon
Please open the box and make sure nothing has been damaged in shipment. If damage is apparent please contact
the ikan customer support department at 713-272-8822, or support@ikancorp.com.
Thank you for purchasing the ikan PT2000 small form teleprompter kit. We know that you will be extremely pleased
with its versatility and ease of use. If you would like more information on our full line of current and up-coming
products please visit our website at: www.ikancorp.com, or call us at 713-272-8822.
P ackage check lIst
□
Metal frame with installed 30/70 teleprompter glass (glass has plastic film for protection during shipping), and two small phillips head screws.
□
□ Metal frame to tripod/camera plate coupler bracket.
Tripod/Camera receiving bracket (upper and lower) with four thumb screws, tripod quarter/twenty- 5/8" holding nut, two front holding bolts with thumb nuts.
□
V8000 8" VGA/video monitor with cables and power supply.
□
□ Teleprompter Hood with Velcro strips.
□ Prompter Pro 2.0 PC/Mac teleprompting software.
Quarter/twenty screw and receiving nut for V8000 monitor.
g ettIng started
1. After carefully removing all the parts from the box, assemble the various PT2000 components as per the included
captioned instructional photo guide (pages 2 & 3).
Tools required: Small to medium 'Phillips-head' screwdriver, medium to large 'Flat-head' screwdriver, small to
medium adjustable wrench.
1. After placing the receiving nut in the receiving channel of the V8000, secure the V8000 monitor to the teleprompter glass
frame/monitor holding bracket using the included quarter/twenty screw
2. Remove the 2 teleprompter glass holding tabs (secured by 4 small 'Phillips-head' screws), from the teleprompter glass
frame. Carefully remove the teleprompter glass and peel away the protective plastic film. Carefully re-install the teleprompter
glass back into the metal frame.
3903 Stoney Brook Dr. Houston Tx, 77063. 1-713-272-8822, support@ikancorp.com © 2007 ikan corporation. All rights reserved. www.ikancorp.com
G
uide
/ PT2000
Checked by