Page 1
Quick Start Guide PT-ELITE-PRO2 Elite Universal Tablet, iPad, and iPad Pro Teleprompter (Version 2) What’s Included 1 x Teleprompter Base 1 x Bracket with Glass 1 x Magnetic Teleprompter Hood with Boot 1 x Monitor 1 x Dual Sided Riser...
Page 2
Setup Step 1 Connect the 15mm rod monitor adapter to the tablet extender. Step 2 Connect the tablet holder to the extender with the D-ring. Loosen the two rod clamps on the rod adapters. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
Page 3
Step 3 Slide the rod adapter into the teleprompter base. Step 4 Pull the red knob to insert the teleprompter bracket with glass into the teleprompter base. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
Page 4
Step 5 Tighten the silver knob to hold the teleprompter bracket in place. Step 6 Attach the magnetic teleprompter hood with boot. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
Step 7 Slide the dual sided riser into the directional channel of the teleprompter base. Larger or taller cameras should insert the lower side facing glass, while smaller cameras should insert with higher side. Specifications Build Material Aluminum / Steel Reading Range 11-14 ft.