Displaying Lacp Settings And Status For The Local Side; Table 3-9 Lacp Internal Configuration Information; Figure 3-72 Lacp - Port Counters Information - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
Field
Marker Unknown Pkts
Marker Illegal Pkts
Web – Click Port, LACP, Port Counters Information. Select a member port to display
the corresponding information.
CLI – The following example displays LACP counters.
Console#show lacp counters
Port channel : 1
-------------------------------------------------------------------------
Eth 1/ 1
-------------------------------------------------------------------------
LACPDUs Sent:
LACPDUs Receive:
Marker Sent:
Marker Receive:
LACPDUs Unknown Pkts: 0
LACPDUs Illegal Pkts: 0
. .
.

Displaying LACP Settings and Status for the Local Side

You can display configuration settings and the operational state for the local side of
an link aggregation.
Field
Oper Key
Admin Key
3-110
Table 3-8 LACP Port Counters (Continued)
Description
Number of frames received that either (1) Carry the Slow Protocols
Ethernet Type value, but contain an unknown PDU, or (2) are addressed
to the Slow Protocols group MAC Address, but do not carry the Slow
Protocols Ethernet Type.
Number of frames that carry the Slow Protocols Ethernet Type value, but
contain a badly formed PDU or an illegal value of Protocol Subtype.

Figure 3-72 LACP - Port Counters Information

91
43
0
0

Table 3-9 LACP Internal Configuration Information

Description
Current operational value of the key for the aggregation port.
Current administrative value of the key for the aggregation port.
www.digisol.com
4-171