Motion Detection Setup - Samsung SHR-5042 User Manual

Motion Detection Setup

Motion Detection Setup
Alarm-Out
None
Duration
All Camera
Sensitivity
High
Area Set
Default
Set the motion detection area, sensitivity and alarm for
each camera video.
Press the (
the camera to be set.

It sets the alarm output when a motion is detected.
Currently the system supports 2 Alarm Out functions
and 1 built-in speaker output.

Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
: The alarm output sound will be
maintained until it is cancelled by pressing the
button manually on the front panel.

It relates to configuration for motion detection and
sensitivity.
The sensitivity can be set to Very High, High, Medium,
Low or Very Low.

If you press the
cursor to the video display area on the right, the motion
area can be set/cancelled.
( ): Sets the whole part as the motion area.
( ): Cancels the whole motion area.
If you press "
initial values.
SHR-5042_Eng.indb 33
OK Cancel
) button after moving the cursor on
: Sets the duration for alarm output.
( ) button after moving the
", the motion setup is reset to the
Video Loss Detection Setup
Video Loss Detection Setup
Alarm-Out Duration
None 10 SEC
None
10 SEC
None
10 SEC
None 10 SEC
Move/Control Select
If a video loss occurs from each channel, it can be set to
generate an alarm output sound.

Sets an alarm-out method when an event has occurred
from the Alarm In.
Currently, this system supports 2 Alarm Out functions
and 1 built-in speaker (beep) output.
The following screen appears when you press the
( ) button after moving the cursor to the Alarm
Out item.
1 2
Beep All
OK Cancel

Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
: The alarm output sound is maintained
until it is cancelled by pressing the
manually on the front panel.
: Sets the duration for alarm output.
OK Cancel
Exit
button
menu setup _33
2007-06-08 ｿﾀﾈﾄ 1:24:57