Manual Installation - D-Link DCS-932L User Manual

Section 2 - Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero Configuration
Setup.
Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your router. You can also plug the external
power adapter cable into the camera at this time.
Plug in the External Power Adapter
Plug the power adapter in to a wall outlet.
Configure Your Camera
Refer to "Configuration" on page 21 for information on how to configure your camera.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For more information, refer to "WPS - Push Button Setup"
on page 18. If your router does not support WPS, you will still be able to set up your camera's wireless settings in the camera's web
interface.
D-Link DCS-932L User Manual

Manual Installation

17