D-Link DCS-932L User Manual page 50

Section 4 - Security
Router Set-Up and Installation
The following steps generally apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the configuration
process. Configure the initial settings of the DIR-655 by following the steps outlined in the DIR-655 Quick Installation Guide.
3. Access the Router with Your Web Browser
If you have cable or DSL Internet service, you will most likely have a dynamically assigned
WAN IP Address. 'Dynamic' means that your router's WAN IP address can change from
time to time depending on your ISP. A dynamic WAN IP Address identifies your router
on the public network and allows it to access the Internet. To find out what your
router's WAN IP Address is, go to the Status menu on your router and locate the WAN
information for your router (as shown on the next page). The WAN IP Address will be
listed. This will be the address that you will need to type in your Web browser to view
your camera over the Internet.
Your WAN IP Address will be listed on the router's
Status > Device Info page.
D-Link DCS-932L User Manual 50