Manual Hardware Installation - D-Link DCS-7010L User Manual

Section 2: Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard.
Connect the Ethernet Cable
Connect the provided Ethernet cable to the cable harness Ethernet coupler .
Connect the other end of the provided Ethernet cable to your network.
Attach the External Power Supply
Attach the external power supply to the cable harness power coupler.
Connect the adapter to a wall outlet or power strip.
1 Ethernet Cable
2 Power Cable
D-Link DCS-7010L User Manual

Manual Hardware Installation

Pre attached Ethernet cable
Pre attached power cable
1
2
17