Page 1
Take the camera out of the box, plug it into a network cable and connect the power. 2. Download Cammy Download the Cammy app on either iPhone App Store or Google Play. 3. Launch the App Launch the app and enter a username and password. 4. Add Camera Choose “Add Camera” from the menu. http://www.cammy.com/guides/d-link-dcs-932l-guide...
Page 2
You will see a list of devices on your network. Look for a device named “DLink International”. If you don’t see any DLink device try waiting a couple of minutes and refreshing by pulling down on the list. Once you see the “DLink International” device click on it. http://www.cammy.com/guides/d-link-dcs-932l-guide...
Page 3
Cammy will show you a MAC address number. If you want to be sure it’s the right device you can compare this number with the one on your Camera, but generally it should be right and you can press “Continue with Setup”. http://www.cammy.com/guides/d-link-dcs-932l-guide...
Page 4
5/9/2014 Cammy - free & easy IP camera monitoring Verify the MAC addresses match. http://www.cammy.com/guides/d-link-dcs-932l-guide...
Page 5
The Camera will then show a test image. If the test image does not appear try hitting refresh and waving your hand in front of the camera. If the test image does not appear try restarting the camera and running the setup process again. http://www.cammy.com/guides/d-link-dcs-932l-guide...
Page 6
5/9/2014 Cammy - free & easy IP camera monitoring http://www.cammy.com/guides/d-link-dcs-932l-guide...
Page 7
5/9/2014 Cammy - free & easy IP camera monitoring Congratulations! You have now completed the setup of your DCS932L to CAMMY. http://www.cammy.com/guides/d-link-dcs-932l-guide...
Need help?
Do you have a question about the DCS-932L and is the answer not in the manual?
Questions and answers