Thank you for purchasing the Fiji fan heater. The FH-201Z comes with a thermostat and three heat settings. With its stylish letterbox design the Fiji is suitable for a wide range of portable heating applications in the home and office environment. Please read and understand these instructions before commencing installation, and leave them with the user when installation is complete.
• Do not use the heater on deep pile carpets or rugs; ensure that there is no overhanging surface within 75cm of the outlet grille. • Do not use in the vicinity of any combustible materials, curtains or other furnishings. 2.
3. Operation Fully uncoil the power cord before plugging the heater in Choose from three heat settings: • Fan only (cool) • 1.0kW (half power) • 2.0kW (full power) Select the maximum heat setting from the thermostat dial. Once the desired room temperature is achieved adjust the dial down until a click is heard and the element light goes off.
4. Maintenance Always isolate the appliance from the power supply before commencing any maintenance. Never use abrasive chemicals or materials to clean the unit. • Clean the exterior of the unit using a soft, dry cloth.
This product is guaranteed against faulty materials and manufacture for a period of one year from the date of purchase. Hyco will in its sole discretion replace, repair or refund any faulty unit. Incorrect installation and failure to follow correct operating instructions are excluded.
Page 8
In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed out dustbin. Hyco Manufacturing Ltd Normandy Court Express Way...
Need help?
Do you have a question about the Fiji FH-201Z and is the answer not in the manual?
Questions and answers