Parking Brake - Dodge 2010 Ram Truck Owner's Manual

Hide thumbs Also See for 2010 Ram Truck:
Table of Contents

Advertisement

382 STARTING AND OPERATING
If necessary, add fluid to restore to the proper indicated
level. With a clean cloth, wipe any spilled fluid from all
surfaces. Refer to "Fluids, Lubricants, and Genuine
Parts" in "Maintaining Your Vehicle" for further
information.

PARKING BRAKE

The foot-operated parking brake is positioned below the
lower left corner of the instrument panel. To release the
parking brake, pull the parking brake release handle.
NOTE: The "Brake Warning Light" will come on and
flash to indicate that the parking brake is applied. You
must be sure that the parking brake is fully applied
before leaving the vehicle.
Parking Brake Release
Be sure the parking brake is firmly set when parked and
the shift lever is in the PARK position. When parking on
a hill, you should apply the parking brake before placing
the shift lever in PARK, otherwise the load on the
transmission locking mechanism may make it difficult to
move the shift lever out of PARK.
I n f o r m a t i o n P r o v i d e d b y :

Advertisement

Table of Contents
loading

Table of Contents