Dodge 2010 Ram Truck Owner's Manual page 44

42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
4. Position the lap belt across your thighs, below your
abdomen. To remove slack in the lap belt portion, pull up
on the shoulder belt. To loosen the lap belt if it is too tight,
tilt the latch plate and pull on the lap belt. A snug belt
reduces the risk of sliding under the belt in an accident.
Removing Slack From Belt
• A lap belt worn too high can increase the risk of
internal injury in an accident. The belt forces
won't be at the strong hip and pelvic bones, but
across your abdomen. Always wear the lap belt as
low as possible and keep it snug.
• A twisted belt will not protect you properly. In a
collision, it could even cut into you. Be sure the
belt is straight. If you can't straighten a belt in a
vehicle, take it to your authorized dealer immedi-
ately and have it fixed.
I n f o r m a t i o n P r o v i d e d b y :
WARNING!