Dodge 2010 Ram Truck Owner's Manual page 374

Hide thumbs Also See for 2010 Ram Truck:

Table of Contents

372 STARTING AND OPERATING

NOTE: Always ensure the clutch is fully engaged or

9. Connect the remote control to the winch control box,

located behind the front bumper. Be careful not to let the

remote control cord dangle in front of the winch. If you

choose to control the winch from inside your vehicle,

always pass the remote through a window to avoid

pinching the cord in the door. Always disconnect the

remote control when not in use.

10. Put wire rope under tension. Using the remote con-

trol switch, slowly wind the wire rope until no slack

remains. Once the wire rope is under tension, stand well

clear of it and never step over it.

I n f o r m a t i o n P r o v i d e d b y :

Chapters

Table of Contents