D-Link DCS-6220G User Manual page 98

DCS-660G User's Manual Using IP surveillance Software
Monitor Program (continued)
Alert Message
If you have checked the box for "Enable Motion Detect" or "Enable Digital Input" on "Camera Configurations
> Alert Settings" screen, the alert message will show in the window shown above. Once the alert, caused
by motion detection or a digital input level changer, is triggered, the alert message will be shown in this
window. If there are more events than this window can display, a scroll bar will appear.
The message format is described as follows:
"time"=>"alert type" #"channel number"("win1","win","win3")
For example, the message "PM 0:41:00=>MO #1(0,1,1)" means that this is a motion detection alert
occurring at 0:41:00 PM in Motion Window  and Motion Window 3, for camera #1. If the message "PM
0:41:56=>DI #1" is listed, that means there is an alert triggered by the DI, for camera #1, at 0:41:56
PM .
D-Link Systems, Inc. 98