Expansion Boards; Installing An Expansion Board - HP ProLiant DL585 User Manual

IMPORTANT:
powered by separate AC power sources.
NOTE:
screw into each power supply.

Expansion boards

Slot
1
2
3
4
5
6
7
8
9

Installing an expansion board

CAUTION:
remove all AC power cords before removing or installing the expansion boards.
CAUTION:
all expansion slots have either an expansion slot cover or an expansion board installed.
For maximum server availability, be sure that the two power supplies are
If the server will be shipped to another location after configuration, install a shipping
Description
PCI-X non-hot-plug expansion slot, 64-bit/100-MHz (half-
length)
PCI-X non-hot-plug expansion slot, 64-bit/100-MHz (full-
length)
PCI Express x4 non-hot-plug expansion slot (full-length)
PCI Express x4 non-hot-plug expansion slot (full-length)
PCI Express x8 non-hot-plug expansion slot (full-length)
PCI Express x4 non-hot-plug expansion slot (full-length)
PCI Express x8 non-hot-plug expansion slot (full-length)
PCI Express x8 non-hot-plug expansion slot (full-length)
PCI Express x4 non-hot-plug expansion slot (half-length)
To prevent damage to the server or expansion boards, power down the server and
To prevent improper cooling and thermal damage, do not operate the server unless
Hardware options installation 46