Initial Settings; Adjusting Initial Settings; Switching The Auxiliary Setting; Setting The Rear Output And Subwoofer Controller - Pioneer AVH-P5000DVD Operation Manual

Section
(--.::O:.!p:..:e:..:...ra=t=in~g~th-=i=-s
. = u=-=. n i = --=t )
a
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
CD
Function display
Shows the function names.
1 Touch the source icon and then touch
OFF to turn this unit off.
2 Touch the screen to display the touch
panel keys.
3 Touch AV MENU and then touch
INITIAL MENU to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
• To go to the next group of function names,
touch
NEXT.
• To return to the previous group of function
names, touch
PREVo
4 Touch ESC to return to the ordinary dis-
play.
• To return to the previous display, touch
BACK.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source on page 48.
Switching the auxiliary 1 setting
• Touch AUX1 on the initial menu to se-
lect desired setting.
• VIDEO -
an iPod with video capabilities
connected with 4-pole mini plug cable (e.g.,
CD-V150M)
• AUDIO -
auxiliary device connected with
stereo mini plug cable
• OFF -
No auxiliary device is connected
Switching the auxiliary 2 setting
• Touch AUX2 on the initial menu to turn
auxiliary 2 setting on.
• To tu rn auxi Iiary 2 setti ng off, touch
AUX2
again.
Setting the rear output and
subwoofer controller
This unit's rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker
(FULL)
or subwoofer
(S.W)
con-
nection. If you switch the rear output setting
to
S.W,
you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
aryamp.
Initially, the unit is set for rear full-range speak-
er connection
(FULL).
When rear output is
connected to full range speakers (when
FULL
is selected), you can connect other full range
speakers
(REAR)
or a subwoofer
(S.W)
to the
RCA rear output.
• When the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you
cannot operate this function.
1 Touch REAR SP on the initial menu.
2 Touch ..... or
~
next to REAR SP to switch
the rear output setting.
Touch ..... to select full-range speaker and
FULL
appears in the display. Touch
~
to select sub-
woofer and
S.W
appears in the display.
• When no subwoofer is connected to the rear
output, select
FULL
(full-range speaker).
• When a subwoofer is connected to the rear
output, select
S.W
(subwoofer).
.-
o
"
tD
aJ
~.
:::s
U2
....
::::r
_.
VI
c
:::s
_
.
....
En
(ill