Pioneer AVH-P5000DVD Operation Manual page 112

ENGLISH
Display with
RCA input jacks
(sold separately)
Ex ternal video
component
(sold separately)
RCA cables (sold separately)
~
To video output
-~~
-~
To audio outputs '-----------'
•
1'--This product
Rear monitor output
(REAR MONITOR OUTPUT) To video input
/ ._~
\20cm (7-7/8 in.)
Video input
(VIDEO INPUT)
L
'>25 cm
/ (9-7/8 in.)
"-·Tl.J
\
Audio input
(AUDIO INPUT)
Lt
WARNING
NEVER install the display in a location that enables the Driver to watch the DVD or Video CD
while driving.
• [t is necessary to set A V INPUT to VIDEO in SYSTEM MENU when connecting the
external video component.
• It is necessary to set A V INPUT to S·DVD in SYSTEM MENU when connecting a
Illulti-DVD player.
When connecting the external video component and the display
When using a display connected to rear video output
This product's rear video outpUt is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
• When installing the optical cable
connection box with the hook and
loop fastener.
Install the optical cable connection box
using the hook and loop fastener in the
ample space of the console box .
~
Hook
r""",,
~LO'P
,,,"""
~
"'"~".<~>",
• When installing the optical cable
connection box with the lock tie.
Wrap the optical cable and connection
box with the protection tape and fasten
with the power code using the lock tie.
Installing the optical cable
connection box
A
WARNING
Avoid installing this unit in locations where the
operation of safety devices such as airbags is pre-
vented by this unit. Otherwise. there is a danger of
a fatal accident.
Avoid installing this unit in locations where the
operation of the brake may be prevented.
Otherwisc. it Illay result in a traffic accident.
Fix this unit securely with the hook and loop fas-
tener or lock tie. If this unit is loose, it disturbs dri-
ving stability. which may result in a traffic acci-
dent.
Connecting and installing the
optical cable connection box
2. Connect the optical cable to the
optical cable connection box.
A
CAUTION
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may he
damaged or could dismount itself, which leads to
an accident or other problems.
• Do not install this unit near the doors where rain-
water is likely to be spilled on the unit. Incursion
of watcr into the unit may cause smoke or fire.
Connecting the optical cable
1. Connect the optical cable and
ground lead to the main unit.
Connect the optical cable so that it does
not protrude from the unit. as shown in
the illustration. Fasten the ground lead
to the protrusion on the back of the
unit.