Pioneer AVH-P5000DVD Operation Manual page 114

ENGLISH
2. Install the unit into the dash-
board.
Screw
&J/
Factory radio mounting
bracket
If you do not plan to detach the front
panel. the front panel can be fastened
with supplied screws and holder.
• Fix the front panel to the unit
using screws and holder after
removing the trim ring.
2. Tighten two screws on each side.
Use any of binding screws (4 mm x 3
mm), binding screws (5 mm x 6 mm)
or flush surface screws (5 mm x 6
mm). depending on the shape of screw
holes in the bracket.
Fastening the front panel
• Whcn installing in a shallow space,
use the following screw holes. In this
case, stick concealing tape on parts
that protrude from the dashboard.
1. Determine the appropriate posi-
tion where the holes on the
bracket and the side of the unit
match.
' " I Use binding screws (4 mm x
J
mm) only.
DIN Rear-mount
"
. .
Rubber bush
~screw
~~
Insert the mounting sleeve into the
dashboard. And then secure the mount-
ing sleeve by using a screwdriver to
bend the metal tabs (90°) into place.
Mounting sleeve