Care And Cleaning; Cleaning Conical Burrs - Breville the Oracle BES980 Instruction Booklet

CARE & CLEANING
CLEANING CyCLE
• CLEAN ME! will be displayed on
the LCD to indicate when a cleaning
cycle is required (approx. 200 shots).
The cleaning cycle cleans the shower
screen and back-flushes the group head.
• Insert the supplied grey silicone
cleaning disc, followed by 1 cleaning
tablet into the filter basket.
• Lock the portafilter into the group head.
• Ensure the water tank is filled with cold
water and the drip tray is empty.
• Press the MENU button and rotate
SELECT dial until 'CLEAN CYCLE' and
'PUSH' are displayed on the LCD.
MENU
EXIT
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
• Press the SELECT dial to start the
cleaning cycle.
34
• The LCD will display a countdown timer
showing remaining time for the cleaning
cycle in seconds.
• When the cleaning cycle has finished,
remove the portafilter and ensure the
tablet has completely dissolved. If the
tablet has not dissolved, repeat these
steps, without inserting a new tablet.
• Rinse the filter basket and portafilter
thoroughly before use.
• Extract an espresso to "season" the
machine and purge the system of
any remaining cleaner.
INStALLING tHE WAtER FILtER
• Discard the used water filter. Soak a new
filter in a cup of water for 5 minutes,
then rinse under cold running water.
• Wash the filter holder with cold water,
taking specific care to rinse the stainless
steel mesh.
• Insert the filter into the two parts of the
filter holder.
• To install the assembled filter holder
into the water tank, align the base of the
filter holder with the adapter inside the
water tank. Push down to lock into place.
• Fill the water tank with cold water before
sliding back into position at the back of
the machine and locking into place.
NotE
Visit www.breville.com.au or call Breville
Customer Service Centre to purchase
water filters.
CARE & CLEANING

CLEANING CoNICAL BURRS

Regular cleaning helps the burrs achieve consistent grinding results which is especially
important when grinding for espresso.
1 2 3
Unlock hopper Remove beans Replace & lock
hopper
6 7 8 8
Remove upper Clean upper Clean lower
burr burr with burr with
burr brush burr brush
12 13 14
Push upper Lock upper burr Insert hopper
burr firmly into
position
Tamp removal
magnet
Burr brush
Grind outlet
brush
4 5
Run grinder until empty Unlock & remove
hopper
9 10 11
Remove tamping Clean grind Replace tamping
fan with tamp outlet with grind fan by hand
removal magnet outlet brush
15
Lock hopper
35