Taking And Storing A Reading; Looking At The Previous Reading - Hyundai BMP 510 Instruction Manual

Taking and Storing a Reading

1) After finishing measurement, values of systolic, diastolic, pulse rate
will be displayed on the LCD as in the right diagram.
2) The results will be shown until the power on button
again or it will switch off automatically 2 minutes later.
3) When the result was shown, press the „ M1" or „ M2" key.
The recorded data will be saved in the data base.

Looking at the Previous Reading

The device can store twin sets (total 100 readings) of recorded data,
and each set data consists values of systolic, diastolic and pulse rate .
Recommendation:
If measuring for the first time, please take
5-10 minutes rest before
measuring. Keep the habit of measuring
at regular time.
1) When power on botton is switched
on, press M1 or M2 for 1 second to
recall the database you need. If hold
the button of M1 or M2, the value will
increase in every ¼ second and you
can get the data faster.
2) When M1 is recalled, the LCD will
appear 1. When M2 is recalled,
the LCD will appear 2.
ENG - 77
ENG
is pushed