Begin To Measure - Hyundai BMP 510 Instruction Manual

Begin to Measure

1) Push the start button.
2) The LCD will display 00 digit. The „00" will
blink on the LCD.
3) About 1 -2 seconds later, the pressure
will be reset, then the cuff begins to inflate
and the pressure value will be displayed.
4) When the cuff pressure rises to 185 mmHg,
the inflation movement stops and the indica-
ted number drops down to start measuring.
5) Along with the measurement, the heart beat
rate is also recorded and the heart sign will
appear on the LCD.
6) The cuff pressure will increase automatically
if not high enough.
7) If the cuff pressure exceeds 300 mmHg, the
„Er" sign will appear and will shutdown. Then
it will stop inflating and release the cuff
pressure.
The cuff pressure will fall slowly during
measuring.
Do not shake the wrist cuff or the monitor.
Keep quiet.
ENG - 76