Eng - Hyundai BMP 510 Instruction Manual

ERROR MESSAGE (TROUBLESHOOTING)
Error Message
Error Symptom
Inflation fault
Artificial
interference
and noise
Abnormal
reading
Deflation too
fast
Over safety
pressure
Low battry
Cause and Solution
1) Cuff is not fastened well, please refasten it.
2) Cuff is broken.
3) Pump, venting or deflation valve fail,
please refer to the distributor.
1) Move or talk during measurement.
2) Posture, etc. was different for each
measurement.
3) User is too nervous.
4) User has severe heart problem.
1) Deflation valve failure, and refer to
the distributor.
2) Cuff not fastened and re-fasten it.
1) Air pipe blocked.
2) Inflation controller failure.
3) Pressure sensor fault.
4) Please measure it again, or consult with
your distributor.
1) Replace with two fresh batteries at
the same time.

ENG - 79

ENG