Lucent Technologies Voice Terminal 8410 Quick Reference page 9

To end a speakerphone call
1 Press
Speaker
NOTE: With a DEFINITY G3V3 or later, if the person
you are talking with hangs up first, the call will be
disconnected. If you press
tone.
STORED NUMBER (display feature)
To see number stored on an AD button
1 Press the softkey below View (for display users)
or Press
2 Press selected AD button.
To see the last number you dialed
1 Press the softkey below View (for display users)
or Press
2 Press the softkey below Last
or, if Last is not available on your display, press
LastDialed
or Dial the Last Number Dialed access code
_______.
TEST
To test the lights and display (if applicable) on
your voice terminal)
1 Press and hold down
Green Test light goes on.
Button lights go on in two separate groups,
and, if your terminal has a display, all display
segments fill in.
2 To end test, release
TIME/DATE (display feature)
To see time and date
1 Press softkey below TmDay (for display users)
or Press
again to hang up.
.
Stored
.
Stored
.
Time/Date
Speaker
.
Test
.
Test
9
, you will get dial