Lucent Technologies Voice Terminal 8410 Quick Reference page 2

4 Dial outside number, extension, or feature access
code you want to store (up to 24 digits).
5 Press
#
6 Repeat Steps 3 through 5 to program additional
buttons.
7 Hang up.
To place an AD call
1 Pick up handset or press
2 Press selected AD button.
To program/reprogram an outside number,
extension, or feature access code into a
personal list
1 Pick up handset.
NOTE: For speakerphone users, press a call
appearance button.
2 Press softkey below Prog (for display users)
or Press
or Dial AD Program access code ________.
3 Dial Personal List number (1, 2, or 3).
4 Dial list item (1, 2, 3...).
5 Dial number you want to store (up to 24 digits).
6 Press
#
7 Repeat Steps 4 through 6 to program additional
items on the same list.
8 Hang up.
To place a call using an AD list button or access
code
1 Press Pers List
or Dial appropriate AD List access code:
List 1 __________
List 2 __________
List 3 __________
NOTE: An
2 Dial desired list item (1, 2, 3...).
.
Program
.
or
Enhcd List
Speaker
or
Grp List
may also be available.
2
.
Sys List