Paper Settings - Morgana AutoFold Pro Operator's Manual

AutoFold Pro
Setting Pages.
Paper settings Page
Paper Type - As a
guide choose as
follows:
0 - approx 0.1 thk
1 - approx 0.2 thk
2 - approx 0.3 thk
3 - approx 0.3+ thk
See Page 19
Paper size Selection.
SYSTEM
Operating the AutoFold Pro
Fold Selection - For quick setting of fold positions on standard size sheets.
Highlighted fold is type currently selected, other folds may be selected.
Currently selected fold is shown in the status area.
NOTE:-
Select the Ruler Icon to set Fold positions manually ('Set by Position' mode).
Paper Length - On selection the status area is replaced with a
calculator for inputting new values. Length range = 190mm - 900mm
Paper input
Page Thickness - On
selection of status
area is replaced with
a calculator for
inputting new values
Range = 0.1 to 0.4mm
Increments of 0.01mm
Arrows may be
selected to increase
or decrease the page
size in 0.1mm
increments
Pre-set Paper sizes for
quick insertion - Standard
sizes for country origin
would be shown.
Page 11