Guidance And Manufacturer's Declaration - Electromagnetic Emissions - Cybernet CyberMed H22 User Manual

Altitudes
Pressure
Input Power Rating
Power Consumption
Touch Screen
Type
Interface
Resolution
Light Transmission
Life Time
Guidance and manufacturer's declaration – electromagnetic
emissions
The model CyberMed H22/N22 is intended for use in the electromagnetic
environment specified below. The customer or the user of the model
CyberMed H22/N22 should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic
emissions
IEC 61000-3-2
6
Operational: up to 3000 m (9842 feet)
Shipping: up to 12192 m (40000 feet)
700 – 1060 hPa (Operation)
186 – 1060 hPa (Storage)
186 – 1060 hPa (Transportation)
For Adaptor:
AC100~240 V, 1.25 – 0.5A, @47 ~ 63 Hz.
For Unit:
DC 12V, 8.33A
CyberMed H22: 98W Max (Typical: 79.50W)
CyberMed N22: 98W Max (Typical: 46.50W)
Full flat 5-wire, Analog Resistive
USB interface, 5V
4096 x 4096
>78% at 550 nm wavelength
35M times, 250g at same place
Compliance
CyberMed H22/N22 User's manual
Electromagnetic environment –
guidance
The model CyberMed H22/N22 uses
RF energy only for its internal
function. Therefore, its RF emissions
are very low and are not likely to
cause any interference in nearby
electronic equipment.
The model CyberMed H22/N22 is
suitable for use in all establishments,
including domestic establishments
and those directly connected to the
public low-voltage power supply