VSG-1200 Vantage Service Gateway
LABEL
SSL Login Page Security
Apply
5.2.1
Scenario Options (for Built-in Authentication only)
When you select Built-in Authentication, you must select a pre-configured scenario option by clicking the Select
option link to display a screen as shown next. Select a scenario option in the Items Check field and click Apply to
save the settings. Then proceed to configure the billing and accounting settings.
The following table describes each scenario.
5-4
Table 5-1 System Settings: Authentication
Select Enable to activate SSL security upon accessing the login screen so that user names and
passwords are encrypted before being transmitted to the VSG.
Select Disable to de-activate SSL security for the subscriber login screen.
Refer to the SSL (Secure Socket Layer) Security chapter for more information.
Click Apply to save the changes.
Figure 5-2 System: Authentication: Scenario Guide
DESCRIPTION
Authentication