VSG-1200 Vantage Service Gateway
Specify the firmware file name in the Local PC File Path field (or click Browse to locate it).
Step 4.
Click Apply to start the file transfer process.
Step 5.
When the file transfer is completed successfully, the following message displays and the VSG
Step 6.
automatically restarts to complete the firmware upgrade process.
Figure 23-3 Web Configurator: Firmware Upgrade Successful
After the VSG finishes restarting, access the web configurator again. Check the firmware version number
Step 7.
in the System Status screen.
Manual Firmware Upgrade via a TFTP Server
Follow the steps below to upload the firmware using the web configurator.
Download the latest firmware from
Step 1.
zipped.
Run a TFTP server program and specify the location of the firmware file and the communication mode.
Step 2.
Refer to the documentation that comes with your TFTP server program for instructions.
Access the web configurator. Refer to the section on accessing the web configurator for instructions.
Step 3.
Click System Tools, Firmware and the Manual Firmware Upgrade link to display the screen as
Step 4.
shown.
Figure 23-4 Firmware Upgrade: Manual Using a TFTP Server
Specify the IP address of the TFTP server in the TFTP Server IP Address field.
Step 5.
Specify the name of the firmware file in the Binary File Name field.
Step 6.
Click Apply to start the file transfer process.
Step 7.
When the file transfer is completed successfully, the following message displays and the VSG
Step 8.
automatically restarts to complete the firmware upgrade process.
After the VSG finishes restarting, access the web configurator again. Check the firmware version number
Step 9.
in the System Status screen.
23-2
Figure 23-2 Firmware Upgrade: Manual
www.zyxel.com
and store it in a TFTP server. Unzip the file if it is
Configuration and Firmware Maintenance