ZyXEL Communications VSG-1200 User Manual page 183

Macintosh OS 8/9
1. Click the Apple menu, Control Panel and double-click
TCP/IP to open the TCP/IP Control Panel.
2. Select Ethernet built-in from the
Connect via list.
3. For dynamically assigned settings, select Using DHCP Server from the Configure: list.
4. For statically assigned settings, do the following:
-From the Configure box, select Manually.
-Type your IP address in the IP Address box.
-Type your subnet mask in the Subnet mask box.
-Type the IP address of your VSG in the Router address box.
5. Close the TCP/IP Control Panel.
6. Click Save if prompted, to save changes to your configuration.
7. Turn on your VSG and restart your computer (if prompted).
Setting Your Computer IP Address
VSG-1200 Vantage Service Gateway
M