Table 17-2 Logs: Log Settings; Table 17-3 Logs: Log Format - ZyXEL Communications VSG-1200 User Manual

LABEL
Syslog Name This field displays the name (or type) of the syslog. Select the check box(es) to send the syslog.
Description This field displays a short description about the syslog.
Interval Time This field displays how often the VSG sends the syslog. If available, enter the number of minutes the VSG
waits between sending the syslog.
Type This field displays the type number of a log. This number is read-only.
Click Apply to save the settings.
Apply
The following table describes the syslog formats.
SYSLOG NAME
System Information Id <MAC Address> System Uptime <0 days 00h:04m:00s> WAN <FrameTxOK|
FrameRxOK| FrameTxError| FrameRxError> LAN <FrameTxOK| FrameRxOK|
FrameTxError| FrameRxError>
System Boot Notice Id <MAC Address> System Up
System Account Activity Id <MAC Address> System Account Activity Information <Username, User IP,
Information Status>
Where:
Account Created Id <Mac Address> Account Create <username, Account usage time, Billing
profile information>
Where:
Subscriber Trace Id <MAC Address> Subscriber Trace <username, user IP, user MAC, interface,
login time, logout time, RxData count, TxData count>
Logged-in Users Id <MAC Address> Logged-in Users <Number of Logged-in users, Start Number,
End Number) (Username, user IP, user MAC, interface, login time, RxData count,
TxData count> [additional information]
Billing Log Id <Mac Address> Billing Log <Username, Billing profile information, Log time,
Usage time, Bill, Charge From>
Where:
LAN Devices Id <MAC Address> LAN Devices Information <Number of devices, Start Number,
Information End number> Device name <status> [additional information]
Syslog

Table 17-2 Logs: Log Settings

Table 17-3 Logs: Log Format

Username = Administrator | Supervisor | Accounting Operator
User IP = IP Address
Status = Login | Logout | Idle Time Out
Username = Single account <username> or Batch account <prefix,
from, to, postfix>]
Billing profile information = index, name
Charge From = PMS | Dynamic
Billing profile name = Name
Log time = MM/DD/YYYY HH:MM:SS
Usage time = "x minutes" | "Expire when 00:00"
Billing profile information = index, name
VSG-1200 Vantage Service Gateway
DESCRIPTION
FORMAT CREATED
Each time interval
specified (between
1 and 10080
minutes).
Each time when
the device reboots.
Each time when
the system account
logs in or logs out.
When an account
is created.
When a subscriber
logs out.
Each time interval
specified.
When a log is
created
Each time interval
specified (between
1 and 10080
minutes).
17-3