Lan Device Management Example; Specifying An Inside Server Example - ZyXEL Communications VSG-1200 User Manual

LABEL
Click Previous to return to the previous page.
Previous
Next Click Next to go to the next page.
End Click End to go to the last page.
Apply Click Apply to save the changes.
16.2.1

LAN Device Management Example

In this example, there is a manageable switch and a wireless access point behind the VSG and you want to be able
to remotely access the web-based management interfaces on the manageable switch and access point over the
Internet.
You map virtual port 60001 on the VSG to the web server port on the access point and 60002 to the web server port
on the manageable switch.
To access the web-based management interface, enter the WAN IP address of your VSG and the virtual port
number of the LAN device separated by a colon. In this example, to access the access point (AP), enter "http://
192.168.1.1:60001" where 192.168.1.1 is the WAN IP address of the VSG. The login screen of the LAN device
management interface should display.
You can also access the LAN devices through the VSG web configurator, refer to the section on accessing the LAN
devices for more information.
16.2.2

Specifying an Inside Server Example

Let's say you have a web server behind the VSG as shown in the next figure.
LAN Devices
Table 16-1 LAN Devices
Figure 16-2 LAN Device Remote Management Example 1
Figure 16-3 LAN Devices: Example 1
VSG-1200 Vantage Service Gateway
DESCRIPTION
16-3