Security Setup; Boot Setup - Prestigio VISCONTE 1300 Technical & Service Manual

Prestigio Visconte 1300

Security Setup

►Boot Settings Configuration

Boot Setup

►Boot Settings
►Boot Device Priority
Note: If you select Realtek Boot Agent, the system will attempt to boot from the network.
Note: When the BIOS performs POST, you may also press F12 Key to enable the Boot Device selection menu. You may choose ATAPI
CDROM, Hard Drive, or Realtek Boot Agent as the first storage device to boot from. If you have already connected a USB Floppy Disk
Drive before powering up, it will appear as a Removable Device in the Boot Device selection menu.
Item Selections /
Sub-menu
Change N/A
Supervisor
Password
Item Selections /
Sub-menu
Quiet Boot Disabled
Enabled
Item Selections /
Sub-menu
Removable Dev.
1st Boot
Realtek Boot-
Device
Agent
Hard Drive
CD/DVD
2nd Boot
Device
1.1.5.Description
Install or Change the Password
1.1.6.Description
When Enabled, the system will display
OEM logo instead of the POST
messages.
When Disabled, the system will display
POST messages (i.e. devices
information.)
1.1.7.Description
Set the type of device for the 1st drive
BIOS attempts to boot from. If Realtek
Boot Agent is selected, system will
attempt to load boot sector from the
Ethernet port.
Set the type of device for the 2nd drive
BIOS attempts to boot from.
11
TECHNICAL SERVICE MANUAL