Table of Contents
Advertisement
Power Setup
Item
Long Battery Life
Mode
Power Button Mode
Note: In Windows XP, suspend mode and settings are determined by settings in the Power Options
Properties (Start > Control Panel > Power Options).
Boot Setup
Note: IDE CD means the system's built-in optical drive. IDE HDD means the system's built-in HDD. PCI BEV is
the Realtek Boot Agent, which allows you to boot from the Network.
Note: When the BIOS performs POST, you may also press Enter Key to enable the Boot Device selection
menu. You may choose CD/DVD, Hard Drive, or PCI BEV (Realtek Boot Agent) as the first storage device to
boot from. If you have already connected a USB Floppy Disk Drive before powering up, it will appear as a USB
FDC in the Boot Device selection menu
Exit Setup
Item
Saves Changes and Exit
Discard Changes and
Exit
Get Default Values
Load Previous Values
20
Selection / Sub-menu
Enabled / Disabled
ON/OFF / Suspend
Selection / Sub-menu
N/A
N/A
N/A
N/A
Description
When Enabled, maximum battery life can be achieved. The processor
performance is lowered.
[On/Off]: When the power button is pressed, the system is turned off
[Suspend]: When the power button is pressed, the system enters the
suspend mode.
This functionality is only available in DOS mode.
Description
After you have completed the BIOS settings, select this item to
save all settings, exit BIOS Setup utility, and reboot. New
system settings will take effect on next power-up. F10 key can
be used for this operation.
Discards changes done so far to any of the setup questions and
exit.
Load Optimal Default value for all the setup questions. F9 key
can be used for this operation.
Load settings that you made during the previous BIOS Setup
session.
Prestigio Nobile 1522E
Advertisement
Table of Contents
