II-3.
T-Rail Mount
To mount the access point to a T-Rail, please follow the instructions below
and refer to diagram C, D & E.
1.
Select the correct size T-Rail bracket from the two sizes which are
included in the package contents.
2.
Attach the T-Rail bracket i to hole ii using screw iii (x 2) as shown in C.
If you need more space between the access point and the T-Rail,
then additionally use bracket iv between bracket i and hole ii (x 2),
and use the longer screws (x 2) included in the package contents.
3.
Clip the access point onto your T-Rail using the now attached T-Rail
bracket.
11