IV-6-3-4. WDS
Wireless Distribution System (WDS) can bridge/repeat access points together
in an extended network. WDS settings can be configured as shown below.
When using WDS, configure the IP address of each access point to
be in the same subnet and ensure there is only one active DHCP
server among connected access points, preferably on the WAN
side.
WDS must be configured on each access point, using correct MAC addresses.
All access points should use the same wireless channel and encryption
method.
5GHz WDS Mode
WDS Functionality
Local MAC Address Displays the MAC address of your access point.
WDS Peer Settings
Select "WDS with AP" to use WDS with access
point or "WDS Dedicated Mode" to use WDS
and also block communication with regular
wireless clients. When WDS is used, each
access point should be configured with
corresponding MAC addresses, wireless
channel and wireless encryption method.
171
Edimax Pro NMS