Table of Contents
Advertisement
II. Camera Setup
II-1.
EdiLife App
Follow the instructions below to connect your network camera to your
Internet ISP using the EdiLife smartphone app.
1.
Screw on the included antenna to the gateway unit and connect the power
adapter. The
2.
Use an Ethernet cable to connect the gateway to your wireless router or
access point. The
to indicate successful cloud and Internet connections.
3.
Insert 4 x AA batteries into the camera unit.
green
power LED will flash slowly when the gateway is ready.
green
power LED and
orange
Internet LED will display on
9
Advertisement
Table of Contents
