Iv-6-5-2. Internal Server - Edimax CAP1200 User Manual

RADIUS Type
RADIUS Server
Authentication
Port
Shared Secret
Session Timeout
Accounting
Accounting Port

IV-6-5-2. Internal Server

The access point features a built-in RADIUS server which can be configured as
shown below used when "Internal" is selected for "RADIUS Type" in the "Local
Network"  "RADIUS Settings" menu.
To use RADIUS servers, go to "Wireless Settings"
"Additional Authentication" and select "MAC RADIUS
Authentication" (see IV-6-2-3. & IV-6-3-3).
Select "Internal" to use the access point's
built-in RADIUS server or "external" to use an
external RADIUS server.
Enter the RADIUS server host IP address.
Set the UDP port used in the authentication
protocol of the RADIUS server. Value must be
between 1 – 65535.
Enter a shared secret/password between 1 –
99 characters in length. This should match the
"MAC-RADIUS" password used in IV-3-1-3-6 or
IV-3-2-3.
Set a duration of session timeout in seconds
between 0 – 86400.
Enable or disable RADIUS accounting.
When accounting is enabled (above), set the
UDP port used in the accounting protocol of
the RADIUS server. Value must be between 1 –
65535.
176
Edimax Pro NMS

"Security"