Appendix; Configuring Your Ip Address - Edimax CAP1200 User Manual

V. Appendix
V-1.

Configuring your IP address

The access point uses the default IP address 192.168.2.2. In order to access
the browser based configuration interface, you need to modify the IP address
of your computer to be in the same IP address subnet e.g. 192.168.2.x (x = 3 –
254).
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system.
In the following examples we use the IP address 192.168.2.10 though you can
use any IP address in the range 192.168.2.x (x = 3 – 254).
If you changed the AP Controller's IP address, or if your
gateway/router uses a DHCP server, ensure you enter the correct
IP address. Refer to your gateway/router's settings. Your
computer's IP address must be in the same subnet as the AP
Controller.
If using a DHCP server on the network, it is advised to use your
DHCP server's settings to assign the AP Controller a static IP
address.
201