Table of Contents
Advertisement
II‐3.
T‐Rail Mount
To mount the access point to a T‐Rail, please follow the instructions
below and refer to diagram C, D & E.
1.
Select the correct size T‐Rail bracket from the two sizes which are
included in the package contents.
2.
Attach the T‐Rail bracket
If you need more space between the access point and the T‐Rail,
then additionally use bracket iv between bracket i and hole ii (x 2),
and use the longer screws (x 2) included in the package contents.
3.
Clip the access point onto your T‐Rail using the now attached T‐Rail
bracket.
i
to hole
ii
using screw
11
iii
(x 2) as shown in
C.
Advertisement
Table of Contents
