Creek Company ODC SPORT XL Assembly Instructions

Outdoor discovery craft

Download this manual

ODC SPORT XL

OUTDOOR DISCOVERY CRAFT

ASSEMBLY INSTRUCTIONS

Each Pontoon consists of 840 Denier Nylon Cover with integral Side Storage Pockets,

Straps and Cam-lock Buckles to secure the Frame, and Main Bladder

THIS BOX CONTAINS:

STEEL FRAME

(1) Left Frame Member

(1) Right Frame Member

(1) Seat Support Frame Member with Padded Bottom

(1) Seat Back Frame

(1) Padded Seat Back

(2) Foot Bars

(1) Rear Frame Member

(1) Mesh Cargo Deck

(1) Stripping Apron

(12) Short Snap Pins

(2) Long Snap Pins

OARS & OARLOCKS

(1) Pair 6-foot 2 piece Oars

(1) Pair Clamp-on Oarlocks

PONTOONS

(1) Left Pontoon

(1) Right Pontoon

with Valve Insert and Valve Plate all preassembled.

Complete with a set of Adaptors

PATCH KIT

WARRANTY CARD

PUMP

T T M

T T M M

Page 1 ODC SPORT XL T T M OUTDOOR DISCOVERY CRAFT T T M M ASSEMBLY INSTRUCTIONS THIS BOX CONTAINS: STEEL FRAME (1) Left Frame Member (1) Right Frame Member (1) Seat Support Frame Member with Padded Bottom (1) Seat Back Frame...
Page 2 III. ATTACH PONTOONS TO FRAME NOTE: Always inflate the Pontoons first, before attaching to Frame. ™ 1. Position inflated Pontoons under the Left and Right Frame Members with ODC Sport XL logos oriented to the outside.The Frame Members fit around the Storage Pockets.
Page 3 Seat Frame assembly Rod Holder Kit is available a. Padded Seat Back and Frame Member. for your ™ (assembly required) ODC SPORT XL b. Padded Seat Bottom ( preassembled) Visit c. Seat Support Member www.CreekCompany.com for details or call 970-879-5221 x103 Fig.
Page 4: Care And Maintenance
™ 4. A gain in altitude will increase the pressure in the Pontoons also. If you are taking your inflated ODC SPORT XL from a low elevation to a high elevation, be sure to let some of the air out of it.