Creek Company ODC 616 OUTDOOR DISCOVERY CRAFT Assembly Instructions

Table of Contents

Download this manual

ODC 616

OUTDOOR DISCOVERY CRAFT

ASSEMBLY INSTRUCTIONS

Each Pontoon consists of 840 Denier Nylon Cover with integral Side Storage Pockets,

Straps and Cam-lock Buckles to secure the Frame, and Main Bladder

with Valve Insert and Valve Plate all preassembled.

THIS BOX CONTAINS:

STEEL FRAME

(1) Left Frame Member

(1) Right Frame Member

(1) Plastic Seat Back

(1) Plastic Seat Bottom

(2) Seat Assembly Pins

(4) Seat Screws

(1) U-Bar

(1) Rear Frame Bar

(8) Short Snap Pins

PONTOONS

(1) Left Pontoon

(1) Right Pontoon

PATCH KIT

WARRANTY CARD

T T M M

Table of Contents

Do you have a question about the ODC 616 OUTDOOR DISCOVERY CRAFT and is the answer not in the manual?

Page 1 ODC 616 T T M M OUTDOOR DISCOVERY CRAFT T T M M ASSEMBLY INSTRUCTIONS THIS BOX CONTAINS: STEEL FRAME (1) Left Frame Member (1) Right Frame Member (1) Plastic Seat Back (1) Plastic Seat Bottom (2) Seat Assembly Pins (4) Seat Screws (1) U-Bar (1) Rear Frame Bar...
Page 2 1. Inflate each Pontoon. The Valve is located inside the Storage Pocket of each Pontoon. Inflate until firm (do not over inflate). Pump is available from the Creek Company or most sporting good stores. 2. Again, be sure top Valve Cap and Valve Assembly are fully seated.
Page 3 Fig. 1 Frame assembly a. U-Bar b. Left Frame Member c. Right Frame Member d. Seat Support Frame Member e. Rear Frame Bar Front Fig. 1a View Seat assembly Seat Seat Support Frame Member Assembly Pins Seat Bottom Fig. 3 Pontoon-to-Frame attachment Seat Screws...
Page 4 Specifications and other details subject to change without notice. All Creek Company products are guaranteed against defects in material and workmanship for the life of the product to the original owner. This does not cover damage due to misuse or normal wear and tear.