Page 1
ODC JETPACK OUTDOOR DISCOVERY CRAFT ASSEMBLY INSTRUCTIONS THIS BOX CONTAINS: ALUMINUM FRAME (1) Left Frame Member (1) Right Frame Member (1) Seat Support Frame Member (1) Padded Seat Assembly (1) Left Foot Bar Extension (1) Right Foot Bar Extension (2) Foot Bars...
Page 2
III. ATTACH PONTOONS TO FRAME NOTE: Always inflate the Pontoons first, before attaching to Frame. ™ 1. Position inflated Pontoons under the Left and Right Frame Members with ODC JETPACK logos oriented to the outside. The Frame Members fit around the Storage Pockets.
Page 3
Fig. 1 Frame assembly a. Cargo Deck (Rear Frame Member with mesh Cargo Deck; assembly required) b. Left Frame Member c. Right Frame Member d. Seat Support Frame Member e. Foot Bar Extensions Foot Bars Fig. 1a Seat Frame assembly a.
™ 4. A gain in altitude will increase the pressure in the Pontoons also. If you are taking your inflated ODC JETPACK from a low elevation to a high elevation, be sure to let some of the air out of it.
Need help?
Do you have a question about the ODC JETPACK and is the answer not in the manual?
Questions and answers
Can you put a trolling motor on the jetpack ?