Creek Company ODC 816 Assembly Instructions

Download this manual

ODC 816

OUTDOOR DISCOVERY CRAFT

ASSEMBLY INSTRUCTIONS

Each pontoon consists of 840 denier nylon cover with integral side storage pockets,

straps and cam-lock buckles to secure the frame; nylon liner and main bladder

with valve insert and valve plate all preassembled.

THIS BOX CONTAINS:

ALUMINUM FRAME

(1) Left Frame Member

(1) Right Frame Member

(1) Plastic Seat Back

(1) Plastic Seat Bottom

(2) Seat Assembly Pins

(4) Seat Screws

(2) Foot Bars

(1) Rear Frame Member

(1) Mesh Cargo Deck

(1) Stripping Apron

(8) Short Snap Pins

OARS & OARLOCKS

(1) Pair 6-foot 2 piece Oars

(2) Pair Clamp-on Oarlocks

(2) Oarlock Bushings

PONTOONS

(1) Left pontoon

(1) Right pontoon

PUMP

Complete with a set of adapters

PATCH KIT

WARRANTY CARD

™

Need help?

Do you have a question about the ODC 816 and is the answer not in the manual?

Page 1 ™ ODC 816 ™ OUTDOOR DISCOVERY CRAFT ASSEMBLY INSTRUCTIONS THIS BOX CONTAINS: ALUMINUM FRAME (1) Left Frame Member (1) Right Frame Member (1) Plastic Seat Back (1) Plastic Seat Bottom (2) Seat Assembly Pins (4) Seat Screws (2) Foot Bars...
Page 2 IV. ATTACH PONTOONS TO FRAME NOTE: Always inflate the Pontoons first, before attaching to Frame. 1. Position inflated Pontoons under the Left and Right Frame Members with ODC 816 logos oriented to the outside. The Frame Members fit around the Storage Pockets.
Page 3 Fig. 3 Pontoon-to-frame attachment Frame slips over two storage pockets Seat Screws Motor Mount/ Anchor Drop / Rod Holder Kit is available for your ODC 816. Visit www.creekcompany.com Fig. 2 for details or call Detail of Snap Pin 970-879-5221 x103...
Page 4: Care And Maintenance
™ 4. A gain in altitude will increase the pressure in the Pontoons also. If you are taking your inflated ODC 816 from a low elevation to a high elevation, be sure to let some of the air out of it.