Subscribe to Our Youtube Channel
Related Manuals for Portwell ROBO-3600VLA
Summary of Contents for Portwell ROBO-3600VLA
- Page 1 R O B O - 3 6 0 0 V L A VIA Eden/C3 VIA Apollo PN133T 5.25-inch SBC U S E R’S M A N U A L Version 1.2P...
- Page 2 PS/2 is a trademark of International Business Machines Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. ROBO-3600VLA User’s Manual...
-
Page 3: Table Of Contents
Table of Contents Introduction ..............1 Product Description ............1 Checklist................2 Specifications ..............3 Board Dimensions ............4 Installations ..............5 Installing the Memory (DIMM)........6 Setting the Jumpers............7 Connectors on ROBO-3600VLA ........12 Watchdog Timer Configuration ........24 ROBO-3600VLA User’s Manual... - Page 4 This page was intentionally left blank. ROBO-3600VLA User’s Manual...
-
Page 5: Introduction
INTRODUCTION Introduction Product Description ROBO-3600VLA is a high-performance flexible embedded board based on the VIA ProSavage TwisterT (PN133T) chipset. The chipset is on an innovative and scaleable architecture with proven reliability. It is a two-chip set consisting of the VT8606 North Bridge Controller and VT82C686B South Bridge Controller. -
Page 6: Checklist
INTRODUCTION Checklist Your ROBO-3600VLA package should include the items listed below. • The ROBO-3600VLA Embedded Board • This User’s Manual • 1 CD containing chipset drivers and flash memory utility • Optional cables such as: • 1 FDD Ribbon Cable •... -
Page 7: Specifications
Support M-Systems 2MB~288MB DiskOnChip flash disk Digital I/O 4 in, 4 out Expansion Slot One 32-bit PCI slot One PC/104 expansion slot Power +5V: 8A max. +12V: 750mA max. Consumption Form Factor 5.25-inch SBC Dimensions 203mm x 146mm (7.99” x 5.75”) ROBO-3600VLA User’s Manual... -
Page 8: Board Dimensions
INTRODUCTION Board Dimensions ROBO-3600VLA User’s Manual... -
Page 9: Installations
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the ROBO-3600VLA in order to set up a workable system. The topics covered are: Installing the Memory (DIMM)........6 Setting the Jumpers............7 Connectors on ROBO-3600VLA ........12... -
Page 10: Installing The Memory (Dimm)
INSTALLATIONS Installing the Memory (DIMM) The ROBO-3600VLA Embedded Board supports one 168-pin DIMM socket for a maximum total memory of 512MB in SDRAM type. The memory module capacities supported are 64MB to 512MB. Installing and Removing DIMMs To install the DIMM, locate the memory slot on the Embedded Board and perform the following steps: 1. -
Page 11: Setting The Jumpers
INSTALLATIONS Setting the Jumpers Jumpers are used on ROBO-3600VLA to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. Following lists the connectors on ROBO-3600VLA and their respective functions. -
Page 12: Jumper Locations On Robo-3600Vla
INSTALLATIONS Jumper Locations on ROBO-3600VLA Jumpers on ROBO-3600VLA SW1(3): CPU Bus Speed Selector JP1, JP4, JP6: RS232/422/485 (COM2) Selection JPX2: TV Output Selection JP2: LAN1 Enable/Disable JP3: LCD Power Setting JP5: COM3/4 RS232 +5V / +12V Power Setting JP7: COM1/2 RS232 +5V / +12V Power Setting... -
Page 13: Sw1(3): Cpu Bus Speed Selector
1-3 & 2-4 1-3 & 2-4 Jumper Setting JP4: JP4: JP4: (pin closed) 3-5 & 4-6 1-3 & 2-4 1-3 & 2-4 JP6: JP6: JP6: JPX2: TV Output Selection JPX2 Setting TV Output Short/Closed TV Output Open LCD Output ROBO-3600VLA User’s Manual... -
Page 14: Jp2: Lan1 Enable/Disable
Signal Name JP7 Pin # Pin 9 (COM1) Pin 9 (COM2) +12V +12V COM1 Settings: Pin 1-3 short = +5V, Pin 3-5 short = +12V COM2 Settings: Pin 2-4 short = +5V, Pin 4-6 short = +12V ROBO-3600VLA User’s Manual... -
Page 15: Jp8: Lan2 Enable/Disable
Short/Closed JP10: AT/ATX Power Selection JP10 Setting AT / ATX Power Short/Closed Select ATX Power Open Select AT Power JP11: Clear CMOS Content JP11 Setting Function Pin 1-2 Normal Operation Short/Closed Pin 2-3 Clear CMOS Content Short/Closed ROBO-3600VLA User’s Manual... -
Page 16: Connectors On Robo-3600Vla
INSTALLATIONS Connectors on ROBO-3600VLA The connectors on ROBO-3600VLA allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on ROBO-3600VLA and their respective functions. Connector Locations on ROBO-3600VLA......... 13 J1: LCD Panel Connector.............. -
Page 17: Connector Locations On Robo-3600Vla
INSTALLATIONS Connector Locations on ROBO-3600VLA J1: LCD Panel Connector J2, JB2, JC2, JD2: Serial Ports J3: 1st Channel LVDS Connector J4: LCD Inverter Output J6: Secondary Parallel Port Connector J7: TV-Out Connector J8: VGA CRT Connector J9: 2nd Channel LVDS Connector... - Page 18 Signal Name Pin # Pin # Signal Name +12V +12V Ground Ground 5V/3.3V 5V/3.3V ENAVEE Ground Ground Ground ShfClk(DCLK) V. Sync (FLM) MDE(DE) H. Sync (LP) Ground ENABKL Ground DNAVDD 5V/3.3V ROBO-3600VLA User’s Manual...
- Page 19 RTS, Request to send CTS, Clear to send RI, Ring indicator No Connect. JB2 (COM2) is jumper selectable for RS-232, RS-422 and RS-485. Pin # Signal Name RS-232 R2-422 RS-485 DATA- DATA+ Ground Ground Ground RTS- RTS+ CTS+ CTS- ROBO-3600VLA User’s Manual...
- Page 20 PD2, parallel data 2 Select PD3, parallel data 3 Ground PD4, parallel data 4 Ground PD5, parallel data 5 Ground PD6, parallel data 6 Ground PD7, parallel data 7 Ground ACK, acknowledge Ground Busy Ground Paper empty Ground Select ROBO-3600VLA User’s Manual...
- Page 21 Drive select 1 Ground Drive select 0 Ground Motor enable 1 Ground Direction Ground Step Ground Write data Ground Write gate Ground Track 00 Ground Write protect Ground Read data Ground Side 1 select Ground Diskette change ROBO-3600VLA User’s Manual...
-
Page 22: J11: Primary Parallel Port Connector
J15, J16: LAN1, LAN2 Connector J15 and J16 are the first and second LAN connectors for RJ45 cables. Signal Name Pin # Pin # Signal Name LED1+ LED1- LED2- Ground LED2+ Ground Note: LED 1: Active LED; LED2: Link LED ROBO-3600VLA User’s Manual... -
Page 23: J17: System Function Connector
An 8-ohm speaker is recommended. Pin # Signal Name Speaker out No connect Ground Power LED: Pins 11 - 13 The power LED indicates the status of the main power switch. Pin # Signal Name Power LED No connect Ground ROBO-3600VLA User’s Manual... - Page 24 Hard Disk Drive LED Connector: Pins 10 and 20 This connector connects to the hard drive activity LED on control panel. This LED will flash when the HDD is being accessed. Pin # Signal Name Ground ROBO-3600VLA User’s Manual...
-
Page 25: J18: Digital I/O
3 sockets for Line Out, Line In and Mic functions. The following table shows the pin assignments of this connector. Signal Name Pin # Pin # Signal Name Line Out R Line Out L Ground Ground Line In R Line In L Ground Ground BIAS Ground ROBO-3600VLA User’s Manual... -
Page 26: J23: Irda Connector
Host data 15 Ground Protect pin DRQ0 Ground Host IOW Ground Host IOR Ground IOCHRDY Host ALE DACK0 Ground IRQ14 No connect Address 1 No connect Address 0 Address 2 Chip select 0 Chip select 1 Activity Ground ROBO-3600VLA User’s Manual... -
Page 27: J27: Ps/2 Keyboard/Mouse Connector
Signal Name Pin # Pin # Signal Name N.C. N.C. KB clock Mouse clock KB data Mouse data Ground Ground J28: CD-in Connector J28 is the 4-pin CD-in connector. Pin # Signal Name Right Ground Ground Left ROBO-3600VLA User’s Manual... -
Page 28: Watchdog Timer Configuration
Enabling Watchdog: MOVAX, 000FH (Choose the values from 0) MOVDX, 0443H OUT DX, AX Disabling Watchdog MOVAX, 00FH (Any value is fine.) DX, 0441H OUT DX, AX WATCHDOG TIMER CONTROL TABLE Level Value Time/sec Level Value Time/sec ROBO-3600VLA User’s Manual... - Page 29 A P P E N D I X ROBO-3600VLA User’s Manual...
Need help?
Do you have a question about the ROBO-3600VLA and is the answer not in the manual?
Questions and answers