Catalytic Converter; Seat - Yamaha XT660R Owner's Manual

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.
CAUTION:
The following precautions must be
observed to prevent a fire hazard or
other damages.
G Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
G
Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.
G
Do not allow the engine to idle
too long.
INSTRUMENT AND CONTROL FUNCTIONS
EAU13431

Seat

To remove the seat
1. Insert the key into the seat lock,
EWA10860
and then turn it as shown.
ECA10700
1. Seat lock
2. Unlock.
2. Pull the seat off.
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
EAU13900
1. Seat holder
2. Projection
2. Push the rear of the seat down to
3. Remove the key.
NOTE:
Make sure that the seat is properly se-
cured before riding.
3-12
lock it in place.
3