Installing The Usb Driver - JVC GC-QX3U Service Manual

Installing the USB Driver

For details on the basic operation of Windows
instruction manual provided with your computer or Windows
98.
Preparation
®
Start Windows 98.
● If you are running other software, close that software. (Make
sure that there are no other application icons open on the
task bar.)
1
Turn the Power dial to "B".
•Hold the Lock button down while turning the Power
dial.
2
Select "USB MODE" with the MODE switch.
•"USB MODE" appears on the LCD panel.
3
Connect the camera to the computer using the provided
USB cable. ( pg. 68)
•The "Add New Hardware Wizard" window will appear.
4
Load the provided CD-ROM to the CD-ROM drive.
5
Click the "Next" button.
6
Click the "Next" button.
7
Confirm that "CD-ROM drive" has been checked, then
click the "Next" button.
•When the loaded CD-ROM is not found, click "Browse"
button and select the provided CD-ROM.
8
Click the "Next" button.
9
Click the "Finish" button.
®
98, refer to the
®
69
EN