Manual Shooting; Manual Focus - JVC GC-QX3U Service Manual

Hide thumbs Also See for GC-QX3U:
Table of Contents

Advertisement

34
EN

Manual Focus

You can focus to the subject manually.
1
Turn the Power dial to "M".
•Hold the Lock button down while turning the
Power dial.
2
Press the FOCUS button, and then press the w
e button within two seconds.
•Press the w e button repeatedly to cycle
through the following modes:
AF-S (Auto Focus-Single):
When the Shutter button is half-pressed,
focus is automaticaly set once.
MF (Manual Focus):
You can focus to the subject manually.
Press the r t button to focus.
Press the r button to lengthen the focal
distance.
Press the t button to reduce the focal
distance.
2.4m/8ft:
Sets the focus to this distance.
∞:
Sets the focus to infinity.
AF-C (Auto Focus-Continuous):
While the Shutter button is half-pressed, the
camera will continue to focus on the subject
automatically.
2
3,4
3
4
NOTES:
Focus manually in the following circumstances:
● When shooting a low-contrast subject, such as a
flat wall or a blue sky.
● When there is an obstacle such as a wire fence
between a subject and the camera.
● When shooting a subject that has a very fine
pattern, or a perfectly regular pattern.
● When shooting a subject under flickering
illumination, including fluorescent light, or when
dark.

MANUAL SHOOTING

1
Point the lens at the subject, position yourself,
and half-press the Shutter button.
• To display the image on the LCD screen
while shooting, press the DSP button.
Press the Shutter button all the way to take
the picture.

Advertisement

Table of Contents
loading

Table of Contents