Iris Setting - JVC GC-QX3U Service Manual

Iris Setting

You can adjust the depth of field and the shutter speed by setting the F value manually.
1
Turn the Power dial to "M".
•Hold the Lock button down while turning the
Power dial.
2
Press the Iris button, and then press the w e
button within two seconds.
•Press the w e button repeatedly to cycle
through the following modes:
PROGRAM → F2.8/3.8 → F5.6 → F8 → F11
→ PROGRAM
•The F value is the iris value, which controls
the amount of light that reaches the camera's
image sensor.
•Smaller the F value is, faster the shutter speed
becomes. Larger the F value is, slower the
shutter speed becomes.
•Larger the F value is, deeper the depth of
field becomes.
•In PROGRAM mode, the iris value and the
shutter speed are calculated and set auto-
matically by the camera.
2
3,4
3
4
NOTE:
● When shooting a night scene, select " " for
"W. BALANCE". (
1
Point the lens at the subject, position yourself,
and half-press the Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
•To display the image on the LCD screen
while shooting, press the DSP button.
Press the Shutter button all the way to take
the picture.
pg. 38)
35
EN