JVC GC-QX3U Service Manual page 106

84
EN
Error Messages (for the camera)
Error messages appear on the LCD screen.
Messages
MEMORY FULL
SET DATE/TIME
WRITE PROTECTION
NO VALID IMAGE
NO MEMORY CARD
FORMAT MEMORY CARD
NOW EDITING
NOW RECORDING
NOW DELETING
PROTECTED
NOW FORMATTING
TROUBLE SHOOTING (cont.)
Contents
The storage capacity of the Memory card has been reached. You
can store additional photos either by replacing the memory card
with a new one, or by deleting photos that are no longer needed.
The date has not yet been set. Set the date.
The Memory card is write protected. Check the contents of the
card, and then either replace this memory card with a new one,
or remove the protect sticker.
This message is displayed if the Power dial is set to "B", when
there are no pictures stored in the Memory card.
This message is displayed if no Memory card has been inserted.
Insert a Memory card. Otherwise, there are dust, finger prints,
etc. on the contact surface on the Memory card. Clean the
surface with a soft cloth.
This message is displayed if a Memory card that is not yet
formatted has been inserted. Format the memory card.
This message is displayed when editing processing is in progress.
This message is displayed when picture data is being saved to a
Memory card.
This message is displayed when picture data is being deleted.
This message is displayed when an attempt is made to delete the
picture that is currently being displayed, and which is protected.
This message is displayed while a Memory card is being
formatted.
Page
22
66
22
—
22
23
55
30
53
52
23