Programming Summary For The Answering System - Panasonic KX-TC1871CB Operating Instructions Manual

Programming Summary for the Answering
System
You can program the following functions using the handset near the
base unit. See the page numbers below for details.
The unit must be in the standby mode before programming.
Lift the handset, and press
(›) (‹)
Press or to select "Program", and press
key).
(›) (‹)
Press or to select "TAD program", and press
(Yes key).
≥"Answering system setting. See base unit." is displayed on the
handset.
≥If the handset displays "No link to base. Place on
cradle and try again." and an alarm tone sounds,
move closer to the base unit and try again.
To adjust the day and time, press
To set the remote code, press
To select the number of rings, press
To select the caller's recording time, press
To select the pager mode setting, press
To store your home telephone number, press
To store a pager number, press
≥The base unit display shows the setting of the selected adjustment or
function.
FWD/EDIT (fl)
Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
≥To cancel during programming, press (FUNCTION/EXIT/CH). Start again from
the beginning.
≥If 6 beeps sound during programming, a wrong key was pressed. Enter the
correct number.
(FUNCTION/EXIT/CH)
(0)
.
(1)
.
(2)
.
(#)
.
(Save key).
.
FWD/EDIT (fl)
FWD/EDIT (fl)
(page 26)
(page 77)
(page 29)
(5)
. (page 28)
(6)
. (page 74)
(7)
. (page 72)
(page 70)
"
(Yes
25